Silicone Defoamer LC-AT150

Description

LC-AT150 is a 100% active silicone defoamer with strong defoaming and foam inhibiting properties.It has a very wide range of applications and can be effectively used in various industrial processing and agricultural chemical production processes.Compared with the same type of silicone defoamer product, the small dosage can provide very good defoaming performance and excellent durable foam suppression effect.

Appearance	Grey or milky white liquid
Viscosity 25℃,cps	500-1500
Ionicity	nonionic
Active content %	100

Application:

AT150 is used in various water-based or solvent based industrial industries, as well as in powdered agricultural chemicals. When preparing powdered agricultural chemicals dispersion in water-based media, control foam; Has excellent defoaming effect and long-lasting foam suppression performance.

Benefits :

The defoaming speed is fast and complete, and there is no small foam residue.
Long foam suppression time, which can effectively inhibit the secondary generation of foam in the whole production process.
Stable chemical properties, less volatile, less prone to demulsification, layering, oil bleaching, etc.
Will not affect the basic properties of raw materials and the normal use of other chemical additives.
Odorless and odorless, effective during hot or cold processing, and capable of sterilization treatment.
Environmentally friendly and pollution-free, with low risk factor.
Excluding raw materials from animals.

How to use:

Before use, the defoamer should be gently stirred and stirred evenly. The stirring time should not be too long or too fast.
The dosage is determined based on different performance requirements, and the specific dosage needs to be determined by the customer after testing, and cannot be blindly added,Excessive addition of urine does not achieve the desired defoaming effect, and excessive use can result residue; After adding defoamer, the solution should be stirred appropriately to fully exert its defoaming effect.
During use, in order to achieve the best finishing effect, it is recommended to stir it appropriately before use to make it even.
Used in many applications, especially in water-based systems, surface active agents on the market can be easily prepared.
Due to the weakened stability of the diluted defoamer AT150, it is necessary to avoid long-term direct exposure of the product's diluent or mixture to the air. When not in use, the container must be tightly covered and stored indoors in a cool and ventilated place. It is recommended to use it as soon as possible and not to store it for a long time.