Description
WB-1 Self drying water-based silicone emulsion:
WB-1 is a self drying water-based Silicone Emulsion . This emulsion can be used in combination with suitable heat stable pigments and fillers, and can be used as the best base material for high temperature resistant water-based coatings. This emulsion can dry itself at room temperature, especially suitable for large-scale anti-corrosion equipment that cannot be baked. The film has good fullness, luster, and hardness, and can be used together with acrylic, epoxy, and polyester emulsion with good miscibility. WB-1 The emulsion can be configured with various water-based high-temperature coatings of 200-800 ℃.
Appearance |
Solvent content |
Solid content % |
Viscosity 25℃ (maps) |
PH |
Dry time |
Thermal rating |
Milk white blue phase liquid |
≤8% |
50±3% |
1500-2500 |
7-8 |
Dry surface for 2 hours Practical work for 48 hours
|
200-800℃ |
WB-2 Water based silicone emulsion:
WB-2 water-based silicone emulsion is a self reactive lotion produced by a new process. It has the characteristics of low particle size, good wettability, excellent freeze-thaw resistance, equal emulsion blue, and can be dried at room temperature or dried at 180-230 ° C/30min). It is mainly used for various anti-corrosion coatings, barbecue ovens, silencers, Class H insulation equipment, etc. The emulsion can withstand 200-80 ℃, and can also be used with acrylic acid, epoxy, and polyester emulsion with good miscibility.
Appearance |
Solvent content% |
Solid content % |
Viscosity 25℃ (maps) |
PH |
Dry time |
Thermal rating |
Milk white blue phase liquid |
≤8% |
50±3% |
1500-2500 |
7-8 |
≤400nm |
200-800℃ |
WB-3 water-borne silicone lotion has the characteristics of temperature resistance, good electrical resistance, full gloss, good adhesion, better than conventional oil and powdered resin adhesion, etc. This lotion can be dried at room temperature or baked at low temperature, and is suitable for high-temperature anti-corrosion equipment, barbecue ovens, stoves, heating plates, silencers, and Class H insulated electrical equipment.
Appearance |
Solvent content |
%Solid content % |
Viscosity 25℃ (maps) |
PH |
Dry time |
Thermal rating |
Milk white blue phase liquid |
≤5% |
50±3% |
1500-2500 |
7-8 |
180-200 ° C20 minutes or use with a dual component curing agent |
200-800℃ |
WB-5 Water based organosilicon non stick pan special emulsion:
WB-5 water-based silicone non stick pan special emulsion has the characteristics of good temperature resistance, high gloss, good fullness, excellent adhesion, etc. This emulsion is specially designed for the external coating of non stick pan, which can be directly switched from oil to water. The prepared water-based coating has excellent water boiling resistance. Good acrylic, epoxy and polyester emulsion.
Appearance |
Solvent content% |
Solid content% |
Viscosity 25℃ (maps) |
PH |
Dry time |
Thermal rating |
Milk white blue phase liquid |
≤8% |
50±3% |
1500-2500 |
7-8 |
≤400nm |
200-400℃ |
Notes:
1. Be careful to prevent impurities from entering after opening.
2. Avoid contact with acid, alkali, organic and amine substances to avoid causing gel.
3. To prevent resin from clumping, the storage temperature should not exceed 40 ℃