SA-AN Coated Anti Drip Agent LC-AD710/LC-AD711

Specification of SA-AN Coated Anti Drip Agent LC-AD710/LC-AD711

Technicl Index

Features & Benefits of SA-AN Coated Anti Drip Agent LC-AD710/LC-AD711

• Used for engineering plastic modification, it has better dispersibility and operability.

• The coating type anti drip agent specially selects SAN as the coating material, which has excellent compatibility with most engineering plastics such as PC and ABS.

• The effective ingredient of anti drip agent has a high utilization rate of fibrosis, which is more conducive to forming a mirror surface and improving physical properties.
  Efficient anti dripping: PTFE instantly fibroses at high temperatures, forming a dense network that strongly inhibits molten material dripping and quickly meets V-0 flame retardant standards.

• Flame retardant synergistic effect: compounded with phosphorus based and nitrogen based flame retardants, reducing the amount of main flame retardant, improving flame retardant efficiency, and not producing toxic smoke.

• Excellent dispersibility

• Coating modification design: Excellent compatibility with high polymers such as PC, PC/ABS, PA, etc., without aggregation, precipitation, or affecting surface gloss.

Applications of SA-AN Coated Anti Drip Agent LC-AD710/LC-AD711

• PC/PC-ABS alloy: computer casing, monitor frame, home appliance casing, power bank/charger casing, power tool components.

• PA (Nylon), PBT/PET: Electronic connectors, switch sockets, automotive interior parts, wire and cable sheaths.

• ABS、HIPS、 Hard PVC: air conditioning/refrigerator components, office equipment casings, rail transit flame retardant materials, building flame retardant products.

• Other high-temperature plastics: high-temperature resistant and flame-retardant electronic components, high-end flame-retardant films, modified plastic particles.

• Suitable for PA, PP, PC, PBT, ABS and other thermoplastic or plastic alloys that require compliance with UL94V-0 standards.

How to use

• PC/ABS 0.20%-0.30%

• PC 0.15%-0.20%

• ABS 0.15%-0.30%

• PBT 0.15%-0.30%

• It can be directly added to the formula of plastic for extrusion granulation, with a typical addition amount of 0.1% to 1%

Package

• N.W20KG Bag with Cartons

Storage

• Store in a cool, dry place, away from direct sunlight.

• After unpacking and using, it is necessary to seal and store the product to prevent moisture from affecting its use;

• Protect your eyes by wearing masks and gloves during work; The workplace must maintain ventilation.